Email Customer Care
NSW Sydney Next Day Delivery Postcodes: 2000-2234, 2745-2770
NSW Country 1-3 days Postcodes: 2235-2744, 2771-2999
VIC Melbourne Next Day Delivery Postcodes: 3000-3207
VIC Country 1-3 days Postcodes: 3208-3999
ACT Canberra 2-3 days Postcodes: 2600-2609
ACT Country 2-3 days Postcodes: 2610-2620
QLD Brisbane 2 days Postcodes: 4000-4207, 4300-4305, 4500-4519
QLD North 3-4 days Postcodes: 4208-4299, 4306-4499, 4520-4999
SA Adelaide Next Day Delivery Postcodes: 5000-5199
SA Country 1-3 days Postcodes: 5200-5854
WA Perth 3-4 days Postcodes: 6000-6199
WA Country 3-6 days Postcodes: 6200-6999
TAS 2-4 days Postcodes: 7000-7999
NT 3-7 days Postcodes: 0800-0899
Please note that our delivery times may vary. Delivery of 3D printers may take longer than times specified. Please see our terms and conditions for more details.
Pick up available from:
585 Little Collins St, CBD Melbourne, 3000
Monday 10:00 am – 5:00 pm
Tuesday 10:00 am – 5:00 pm
Wednesday 10:00 am – 5:00 pm
Thursday 10:00 am – 5:00 pm
Friday 10:00 am – 5:00 pm
* For all pick up printer purchases please send us an email to firstname.lastname@example.org so that we can inform you of our stock quantities.
We ship with E-go courier or Australia Post. Every weekday, the local agent comes to our warehouse and picks up the orders in the afternoon. We choose the fastest option according to your postcode, fast shipping is one of our many perks.
All items are dispatched same day if ordered before 12pm. For orders after 12pm, we will bend over backwards trying to get it out same day, otherwise it will be dispatched the following day. We are very fast to dispatch your purchases because we also shop online and know there is nothing worse than waiting ages for an online purchase to be dispatched! We guarantee your order will be dispatched as fast as possible.
We will use Australia Post to delivered to PO Boxes. Australia Post will attempt to deliver to your home, if nobody is home, they will leave a parcel note and you will be able to collect your package from the local post office.
If you have special delivery instructions such as "leave on back porch" or "leave behind letterbox", you may enter these instructions in the "Comments" box on the checkout page. We will add these instructions to the delivery, so you get your parcel delivered exactly as requested.
If you have any questions about shipping please send us a message @ email@example.com
3D Printing accuracy of 3DPS ABS and 3DPS PLA?
Both materials are quite capable of being 3D printed into dimensionally accurate parts.
3DPS ABS: A sometimes-frustrating hurdle when printing with ABS is the edge of thinner parts curling upwards. Our 3DPS ABS has been engineered as a strong flexible plastic, which reduces warping in such circumstances. For fine detailed prints with sharp edges we recommend a fan to cool prints that may have intricate sections of the prints. If using this technique it is important not to cool the print too much as to affect the layering adhesion. It is best to enclose the print area so that the surrounding air temperature is much higher than room temperature.
3DPS PLA: As PLA undergoes a phase-change when heated as it becomes much more liquid than ABS. It is a good idea to actively cool the print to successfully print corners and small details without the risk of it cracking or warping your print.
The key differences when printing between 3DPS PLA and 3DPS ABS?
3DPS PLA is a rigid liquid whilst 3DPS ABS is a crystallised liquid. What does this mean when 3D Printing? When ABS is heated it transits slowly from a gel to a liquid while PLA transits from solid to liquid. This is part of the reason why when printing with 3DPS PLA a model fan is necessary as these transitions work in the opposite direction allowing PLA to cool quicker.
3DPS ABS is much more flexible then 3DPS PLA and will bend much further than 3DPS PLA without snapping.
3DPS PLA’s finish is more glossy than 3DPS ABS and can becomes more glossy the higher the print temperature.
3DPS ABS – Generally when printing it has the smell of hot plastic. Some people like this smell, others find it horrible whilst some people don’t really smell it! But either way it is most important that you are printing in a well ventilated room, especially if printing in a small or confined space. To reduce plastic smell and to improve the print quality we suggest enclosing the print space as suggested in the My prints aren’t sticking to the print bed! section.
3DPS PLA – On the other hand because PLA is derived from biological resources, meaning our 3DPS PLA is biodegradable and has a sweet smell similar to semi-sweet cooking oil or corn syrup, which is considered as an improved smell over the hot plastic alternative.
However the biggest influence on the smell regardless of the plastic type that you are printing with is the print temperature. You will find that the smell increases with higher print temperatures.
What is the difference between 3DPS Filaments?
All 3DPS filaments are thermoplastics, which means that they become soft and malleable when heated and return to a solid state when they are cooled. The extruder on your 3D printer has a heating element that introduces heat to the 3DPS printer filament melting it down and then applies it layer by layer to your 3D printed model. We have a wide range of 3DPS filaments of which all have a wide range of different applications. While there are many thermoplastics around very few of them are used for 3D Printing.
Why? 3D Printing requires a thermoplastic to pass three different tests. The initial extrusion process of our 3DPS filament starts off as raw thermoplastic that comes in pallet form. 3DPS Filament only uses brand new the highest quality raw materials. Why? The extrusion process in making the 3DPS filament is in essence the same heating and cooling process that your extruder uses to build the layers of your model. So it is imperative that the raw material is brand new and of the highest quality. The second is trace binding during the 3D printing process and lastly the end use application.
My prints aren’t sticking to the print bed!?
There could be many reasons why this can occur but below are the basics:
- Firstly is your print bed level?? If you don’t have a machine that is self-calibrating and you are manually levelling the bed then make sure that the entire bed surface is at the same level. We mean really level! If you are planning to print at 0.1mm or 0.2mm then all it takes is the bed level to be 0.1mm out and you could end up with a funny looking print.. !
- We suggest our range of tapes that can be found here for a hassle free print surface!
- No matter what surface you use to print on, one of the most important things to consider is: have I cleaned my surface, and have I cleaned and re-cleaned it again! You will be amazed how dirty your seemingly grease free fingers and how much grease the leave on the print surface when applying tapes. So use a lint free towel with a good soaking of acetone and wash the print surface several times to free it from dirt and oils.
- Use what you have – a heated printer bed? Use it! Our ABS requires the use of Kapton tape or PET tape and a heat bed at a 110C, whilst our PLA sticks best with Heat resistant Blue tape and a heat bed temperature of around 60c!
- Print in a nice warm room! This is most important with our 3DPS ABS, in fact if you can keep the entire build area warm it is highly beneficial! If your print bed is set at 110c and your room temperature is 20c then that’s 90c temperature range that the model is experiencing. I bet you would want pop off and run away too if your head was at 20c and your feet at 110c! Enclosed printers are best for keeping the build area warm, but if you don’t have an enclosed printer then perhaps try using a box over the printer made from wood or Perspex (or any material you desire, you’re a maker remember!)
- Still not sticking? Then ABS juice is your friend. Grab all your old rafts, supports and failed 3DPS ABS prints put them in a glass container (or plastic, but make sure it isn’t ABS based) and add a dash of Acetone. Leave it for a few hours and let the Acetone dissolve the ABS or give it a shake to speed up the dissolving process. You should end up with a runny glue, if it is thick and gluggy either wait a little longer for the ABS to dissolve or add more Acetone. Spread a nice even and very thin surface across the tape laying on the print surface and start printing!
But what about PLA?
In general 3DPS PLA is a better ‘sticker’ than 3DPS ABS but if you run into trouble get a glue stick and apply a nice thin layer of glue on top the Heat resistant Blue tape. You can also try hairspray but be careful as you the hairspray brands differ significantly in quality and some can make your print bed less sticky then before you applied it!
- Tweak the model! Check that there is a significant surface area touching the printer bed, or change the settings in your printer software. You can also tweak the raft, add supports or change your original model to suit your print!
- Lastly, remember your settings! I know you have heard this before but every printer is different and nearly every print is too! Take notes on what works best, and apply the same principles to your next print it really helps to know what works best.. and to remember it!
What is the best temperature to 3D Print with your 3DPS filament?
Every 3D Printer is different and you will need to play around with small increases or decreases in temperature. Our specified temperature ranges is a good place to start but it is a good idea to play around with your own temperature settings. For example a much higher print temperature with our 3DPS PLA will result in a nice shiny finish whilst lower temperatures with print will result in a more matte finish with more precise layering. Please just keep in mind that the temperature settings are only recommendations, and that each personal 3D printer requires different settings for optimal printing results!
I bought a product, where is my invoice?
After your payment has been processed you can download a pdf version of your tax invoice. Navigate to your ‘My account’ click on ‘My Orders’ you should then be able to view all of your orders, navigate to ‘View’ on the right hand side of each order, scroll down and download your PDF invoice from the link. It includes all our details: ABN etc. as well as your ordered items and associated costs.
Do you cater for special orders?
In some circumstances this can be arranged, we will try and cater for your needs. Please email us with your requirements at firstname.lastname@example.org
Do you offer volume pricing for larger organisations?
In some circumstances this can be arranged. Please email us with your requirements at email@example.com
How will my product be shipped?
We use a Courier Service or Australia Post; once your order is processed a tracking number will be updated in your ‘My account’ under both ‘Recent Orders’ or the my ‘My Orders’ section. It can also be viewed on you ‘Order Completed’ email once your order has been processed.
How long will it take to get my order?
For 3DPS and accessory purchases you should receive them anywhere in Australia in about a week. 3D printer purchases may take longer up to 2-3 weeks in some circumstances.
For more precise shipping information please see our Shipping and Info PageShipping and Delivery Info
Can I track my order?
Once your order status is complete and you have received the email with your shipping details we will update your account with tracking details of your package.
- Log into your ‘My Account’
- Navigate to ‘Recent orders’
- Click ‘View’ on your order
You will then see which carrier your order was shipped with, as well as the orders tracking number.