How Does a 3D Printer Work?
There is a lot of excitement building around what 3D printers can and might do. But how does a 3D printer work? It’s actually not very complicated.
Here are the mechanics behind the most common consumer-level printers that extrude plastic.
In goes filament, out comes gooey plastic
3D printer owners choose between two types of plastic: acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA). Some printers work with just one, other printers work with both. The plastic comes as strands of filament that are usually a standard 1.75 millimeters or 3 millimeters in width.
ABS, which is used to make Legos, is chemical-based and works at slightly higher temperatures. PLA is derived from natural sources, such as corn or sugarcane. It’s more rigid and glossy than ABS. Outside of 3D printing, it can be used to make compostable packaging.
Once you’ve obtained the filament, it is fed into the 3D printer’s print head. Generally, this is a boxy shape with a nozzle sticking out of it.
A gear pulls the piece of filament through the print head. Just before it is extruded by the pointed nozzle, the filament passes through a heated tube and liquifies. The nozzle deposits it in ultra-fine lines generally about 0.1 millimeters across. The plastic solidifies quickly, sealing together layers.
ABS generally needs to be printed on a heated surface; otherwise, the bottom layer of plastic curls up. PLA can be printed on a non-heated surface.
Most printers have one print head, which means objects are printed in one color, or the filament has to be switched out during the print job. Some printers, such as MakerBot’s newest, the Replicator 2X, have two print heads. This allows objects to be printed in two different colors. botObjects has promised to build a full-color printer that mixes filaments to produce a full spectrum of color.
Back and forth, layer by layer
3D printing is additive manufacturing. That means the plastic is built up one layer at a time.
A dragon head printed on a Type A Machines Series 1. Photo by Signe BrewsterThe print surface — which is called the print bed — and print head work together to print in three dimensions. On a MakerBot Replicator 2, the print head is suspended on a gantry system. Two metal bars that run across the top of the Replicator support the print head. The print head can move back and forth along them. At the edge of the printer, the two metal bars connect to another two bars. This allows them to move forward and backward, and the print head to move in four directions altogether. The print bed moves up and down to add a third dimension.
Other 3D printers like RepRaps, the open source DIY printers that started the consumer 3D printing trend, sometimes work slightly differently. The print bed may move up, down, forward and backward while the print head only moves side to side. Or there are more unusual systems, such as the DeltaMaker, where the print head moves in three dimensions.
Print jobs can take minutes, hours or days, depending on the size and density of an object. For example, artists recently ran seven Type A Machines Series 1 printers for two months straight to build a 10 x 10 x 8 foot sculpture.
3D printers don’t just print plastic
Not all 3D printers are the same. Professional 3D printers are capable of printing higher quality objects with more diverse materials. At the Shapeways factory, where huge 3D printers output many objects at once, goods aren’t limited to PLA and ABS. There’s brass, ceramic, steel and five types of plastic. Some of their machines rely on laser sintering, which uses lasers to fuse together particles of material. Some key laser sintering patents are set to expire next year, which could soon bring them to consumer printers.
FormLabs’ Form 1, a stereolithography printer, is one of the key printers to watch for non-traditional technologies’ entry into the consumer market. Metal, and even hybrid, printers could be next.
Source: www.gigaom.com
Author: Signe Brewster